meta name="google-site-verification" content="OL36qdAc_5vPij0DW1FBhKG6qP4irXDkUPAgo7rs2cc" />
Queen Size Platform Bed Brown

Good Queen Size Platform Bed

Making A DIY Platform Bed

Steps for DIY Platform Bed Design

November 14, 2018 Platform Beds

DIY King Size Platform Bed Frame

King Size Platform Bed Frame – A king bed covers a large footprint in your bedroom, in many cases, that dominate the space. For this reason, you want an extra bed frame to be nice. Unfortunately, double bed frames can be very expensive. However, a platform can be built at sea level that rises from the bed high enough to allow air flow. This makes the bed and its coatings the real masterpiece in your room, allowing you to save your money for other things.

Adjust two beams of king size platform bed frame parallel to each other with their ends aligned. The outer edges of the beams should be 75 inches apart. Adjust the remaining three beams evenly spaced between the first two, also parallel and aligned with the ends. Place a board on the beams with their ends aligned with the outer edges of the first two beams. Slide down until your outer edge is aligned with the ends of the beam. Screw in place with a wood screw per beam.

0 Inspiration Gallery from DIY King Size Platform Bed Frame

 

Place the second board on the side and flush against the first. Screw in place with one screw per beam. Continue laying down and bolting on the boards until the joists are covered. Sand all exposed faces of your wood from the king size platform bed frame.

Comments are closed.

http://www.peter-schiff.com/ -->