Queen Platform Bed – You can spend a lot of money on a frame for your queen mattress – in some cases more than $ 1,000. An alternative is to build your own simple platform framework. This model costs less and adds a simple clean-lined feeling to the room where it is installed. If you want something more elaborate, you can use the platform model that the base and add messages, headers and other accents from there.
But the wood to the specified lengths. Sand with coarse-grained sandpaper. Arrange two long and short beams in both beams a rectangular frame. The ends of the long beams must butt the inner faces of the short beams. Screw in place with two screws per corner. Set the third of long rods inside the rectangular queen platform bed, parallel and in the middle between the two long external beams. Screw into place as you did the corners of the frame.
Place the two sheets of plywood on the top of the frame so that they form a rectangle that matches the rectangle of the frame. Screw the blades into place with a screw around the corner and a screw at the midpoint of each edge. Sand all exposed wood with fine-grained sandpaper. You can paint or dye the queen platform bed if you like. However, most bedclothes hang from the sides to the point that little, if any, of the fabric, is actually visible.